Free crab SVG

Mandala crab SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mandala crab, as a solid black shape
Mandala crab. The preview is the SVG file itself.

A broad-shelled crab with a mandala cut into its back: a centre dot, a ring of eight petals, a small flower each side and a row of dots following the edge. Cut it large and weed with a pin.

What is in the file

Size100 × 85 mm (3.94 × 3.33 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut44: 1 outer edge and 43 cut-outs
Cut length1,255 mm at this size
Narrowest part1.2 mm at this size
Nodes473 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,704 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.85 in (25 × 21 mm)0.3 mm319 mm110Too fine for most machines
2 × 1.69 in (51 × 43 mm)0.61 mm638 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.54 in (76 × 64 mm)0.91 mm956 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.38 in (102 × 86 mm)1.2 mm1,275 mm6Vinyl, card and thin sheet
6 × 5.08 in (152 × 129 mm)1.8 mm1,913 mm2Vinyl, card and thin sheet
8 × 6.77 in (203 × 172 mm)2.4 mm2,550 mm1Vinyl, card and thin sheet
12 × 10.15 in (305 × 258 mm)3.7 mm3,825 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More crab SVG files

← Crab with a monogram ring All 12 crabs Single crab claw →