Free crab SVG

Hermit crab in a shell SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hermit crab in a shell, as a solid black shape
Hermit crab in a shell. The preview is the SVG file itself.

A hermit crab in side view, leaning out of a coiled shell on three pointed legs with one big claw forward and two eyes up on stalks. The coil is cut as two curved slits.

What is in the file

Size100 × 76 mm (3.94 × 2.99 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length604 mm at this size
Narrowest part1 mm at this size
Nodes193 curve and line segments

Measured from the file. PNG: 2,000 × 1,537 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.76 in (25 × 19 mm)0.25 mm153 mm120Too fine for most machines
2 × 1.52 in (51 × 39 mm)0.51 mm307 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.28 in (76 × 58 mm)0.76 mm460 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.04 in (102 × 77 mm)1 mm614 mm6Vinyl, card and thin sheet
6 × 4.55 in (152 × 116 mm)1.5 mm920 mm2Vinyl, card and thin sheet
8 × 6.07 in (203 × 154 mm)2 mm1,227 mm1Vinyl, card and thin sheet
12 × 9.11 in (305 × 231 mm)3 mm1,841 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More crab SVG files

← Single crab claw All 12 crabs Pair of crab claws →