Free crab SVG

Single crab claw SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Single crab claw, as a solid black shape
Single crab claw. The preview is the SVG file itself.

One big claw on its jointed arm, pincer open, with a row of small teeth along the inside of each finger. For a seafood shack sign, a crab boil invitation or a bib.

What is in the file

Size49 × 100 mm (1.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length371 mm at this size
Narrowest part3.9 mm at this size
Nodes114 curve and line segments

Measured from the file. PNG: 1,023 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.49 × 1 in (12 × 25 mm)0.99 mm94 mm170Fine detail: vinyl and paper only, weed with care
0.98 × 2 in (25 × 51 mm)2 mm188 mm50Vinyl, card and thin sheet
1.48 × 3 in (37 × 76 mm)3 mm283 mm21Vinyl, card and thin sheet
1.97 × 4 in (50 × 102 mm)4 mm377 mm10Any material, including 3 mm wood and acrylic
2.95 × 6 in (75 × 152 mm)5.9 mm565 mm3Any material, including 3 mm wood and acrylic
3.94 × 8 in (100 × 203 mm)7.9 mm754 mm2Any material, including 3 mm wood and acrylic
5.9 × 12 in (150 × 305 mm)12 mm1,131 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More crab SVG files

← Mandala crab All 12 crabs Hermit crab in a shell →