Free crab SVG

Pair of crab claws SVG

Pair of crab claws, as a solid black shape — Pair of crab claws. The preview is the SVG file itself.

Two matching claws on short arms, as loose mirrored pieces. Set one each side of a name, a date or a monogram, or stick them on a pot of crab boil seasoning.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 65 mm (3.94 × 2.57 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	2 outlines
Cut length	437 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	104 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,333 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.65 in (25 × 17 mm)	Over 1.5 mm	111 mm	140	Vinyl, card and thin sheet
2 × 1.31 in (51 × 33 mm)	Over 3 mm	222 mm	40	Any material, including 3 mm wood and acrylic
3 × 1.96 in (76 × 50 mm)	Over 4.6 mm	333 mm	15	Any material, including 3 mm wood and acrylic
4 × 2.61 in (102 × 66 mm)	Over 6.1 mm	444 mm	8	Any material, including 3 mm wood and acrylic
6 × 3.92 in (152 × 100 mm)	Over 9.1 mm	666 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.22 in (203 × 133 mm)	Over 12 mm	888 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.84 in (305 × 199 mm)	Over 18 mm	1,332 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More crab SVG files

← Hermit crab in a shell All 12 crabs Classic crab with raised claws →