Free computer SVG

Computer mouse with a lead SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Computer mouse with a lead, as a solid black shape
Computer mouse with a lead. The preview is the SVG file itself.

A mouse seen from above: two buttons parted by a seam, a scroll wheel between them, a curved seam across the body and a lead that curls away from the front. One piece.

What is in the file

Size50 × 100 mm (1.96 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length450 mm at this size
Narrowest part2.8 mm at this size
Nodes52 curve and line segments

Measured from the file. PNG: 1,033 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.5 × 1 in (13 × 25 mm)0.71 mm114 mm170Fine detail: vinyl and paper only, weed with care
0.99 × 2 in (25 × 51 mm)1.4 mm229 mm50Vinyl, card and thin sheet
1.49 × 3 in (38 × 76 mm)2.1 mm343 mm21Vinyl, card and thin sheet
1.99 × 4 in (50 × 102 mm)2.8 mm457 mm10Vinyl, card and thin sheet
2.98 × 6 in (76 × 152 mm)4.3 mm686 mm3Any material, including 3 mm wood and acrylic
3.98 × 8 in (101 × 203 mm)5.7 mm914 mm2Any material, including 3 mm wood and acrylic
5.96 × 12 in (151 × 305 mm)8.5 mm1,372 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More computer SVG files

← Computer floppy disk All 17 computers Computer processor chip →