Free computer SVG

Computer floppy disk SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Computer floppy disk, as a solid black shape
Computer floppy disk. The preview is the SVG file itself.

The disk that became the save button: a square with one corner clipped, a sliding shutter with its window at the top, a ruled label below and a small square hole in each bottom corner.

What is in the file

Size96 × 100 mm (3.78 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length1,331 mm at this size
Narrowest part3.6 mm at this size
Nodes78 curve and line segments

Measured from the file. PNG: 1,923 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)0.91 mm338 mm100Fine detail: vinyl and paper only, weed with care
1.92 × 2 in (49 × 51 mm)1.8 mm676 mm25Vinyl, card and thin sheet
2.88 × 3 in (73 × 76 mm)2.7 mm1,014 mm9Vinyl, card and thin sheet
3.84 × 4 in (98 × 102 mm)3.7 mm1,352 mm6Any material, including 3 mm wood and acrylic
5.76 × 6 in (146 × 152 mm)5.5 mm2,028 mm2Any material, including 3 mm wood and acrylic
7.68 × 8 in (195 × 203 mm)7.3 mm2,705 mm1Any material, including 3 mm wood and acrylic
11.52 × 12 in (293 × 305 mm)11 mm4,057 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More computer SVG files

← Retro computer with a tube screen All 17 computers Computer mouse with a lead →