Circus trapeze artist SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A figure hanging by both hands from a trapeze bar slung on two ropes under a beam, swinging with one leg trailing and one knee bent. A plain silhouette with no face, taller than it is wide.
What is in the file
| Size | 53 × 100 mm (2.1 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 542 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 127 curve and line segments |
| Also found as | Circus acrobat SVG |
Measured from the file. PNG: 1,104 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.53 × 1 in (14 × 25 mm) | 0.56 mm | 138 mm | 160 | Fine detail: vinyl and paper only, weed with care |
| 1.07 × 2 in (27 × 51 mm) | 1.1 mm | 275 mm | 45 | Vinyl, card and thin sheet |
| 1.6 × 3 in (41 × 76 mm) | 1.7 mm | 413 mm | 18 | Vinyl, card and thin sheet |
| 2.14 × 4 in (54 × 102 mm) | 2.2 mm | 551 mm | 10 | Vinyl, card and thin sheet |
| 3.2 × 6 in (81 × 152 mm) | 3.4 mm | 826 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.27 × 8 in (109 × 203 mm) | 4.5 mm | 1,101 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.41 × 12 in (163 × 305 mm) | 6.7 mm | 1,652 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More circus SVG files
-
Circus ticket with stars Solid · one piece -
Circus ticket booth Solid · one piece -
Three circus juggling clubs Solid · one piece -
Circus wagon wheel Solid · one piece -
Circus bunting between two poles Solid · one piece -
Circus silhouette with three tents Solid · one piece -
Circus plaque with marquee lights Solid · one piece -
Circus theme set of six Solid · 6 pieces
← Circus seal balancing a ball All 15 circus designs Circus ticket with stars →