Free circus SVG

Circus silhouette with three tents SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Circus silhouette with three tents, as a solid black shape
Circus silhouette with three tents. The preview is the SVG file itself.

The big top in the middle with a small round tent each side, joined by two lines of little pennants that run from its flagpoles down to theirs. A long low strip for the foot of an invitation or a party banner.

What is in the file

Size100 × 49 mm (3.94 × 1.93 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length672 mm at this size
Narrowest part1.9 mm at this size
Nodes149 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,017 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.49 in (25 × 12 mm)0.48 mm171 mm170Too fine for most machines
2 × 0.98 in (51 × 25 mm)0.97 mm341 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.47 in (76 × 37 mm)1.4 mm512 mm21Vinyl, card and thin sheet
4 × 1.96 in (102 × 50 mm)1.9 mm683 mm10Vinyl, card and thin sheet
6 × 2.93 in (152 × 75 mm)2.9 mm1,024 mm3Vinyl, card and thin sheet
8 × 3.91 in (203 × 99 mm)3.9 mm1,366 mm2Any material, including 3 mm wood and acrylic
12 × 5.87 in (305 × 149 mm)5.8 mm2,048 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More circus SVG files

← Circus bunting between two poles All 15 circus designs Circus plaque with marquee lights →