Circus seal balancing a ball SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A seal propped on its front flipper on a tub, nose in the air, with a ball balanced on the tip of it. The ball has a star cut through it and the seal has a round eye.
What is in the file
| Size | 78 × 100 mm (3.05 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 10: 1 outer edge and 9 cut-outs |
| Cut length | 570 mm at this size |
| Narrowest part | 3.8 mm at this size |
| Nodes | 217 curve and line segments |
Measured from the file. PNG: 1,567 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.78 × 1 in (20 × 25 mm) | 0.97 mm | 145 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 1.55 × 2 in (39 × 51 mm) | 1.9 mm | 290 mm | 30 | Vinyl, card and thin sheet |
| 2.32 × 3 in (59 × 76 mm) | 2.9 mm | 434 mm | 12 | Vinyl, card and thin sheet |
| 3.1 × 4 in (79 × 102 mm) | 3.9 mm | 579 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.65 × 6 in (118 × 152 mm) | 5.8 mm | 869 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.2 × 8 in (157 × 203 mm) | 7.7 mm | 1,158 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.3 × 12 in (236 × 305 mm) | 12 mm | 1,737 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More circus SVG files
-
Circus trapeze artist Solid · one piece -
Circus ticket with stars Solid · one piece -
Circus ticket booth Solid · one piece -
Three circus juggling clubs Solid · one piece -
Circus wagon wheel Solid · one piece -
Circus bunting between two poles Solid · one piece -
Circus silhouette with three tents Solid · one piece -
Circus plaque with marquee lights Solid · one piece
← Circus ringmaster’s top hat on a tub All 15 circus designs Circus trapeze artist →