Free Christmas tree SVG

Zigzag line Christmas tree SVG

Zigzag line Christmas tree, drawn as a line — Zigzag line Christmas tree. The preview is the SVG file itself.

A single line that zigzags down from a star, each stroke longer than the one before. For pen plotters, foil quills and single-line engraving.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	70 × 100 mm (2.77 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	749 mm at this size
Narrowest part	2.2 mm at this size
Nodes	61 curve and line segments

Measured from the file. PNG: 1,431 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.7 × 1 in (18 × 25 mm)	0.56 mm	190 mm	130	Fine detail: vinyl and paper only, weed with care
1.41 × 2 in (36 × 51 mm)	1.1 mm	380 mm	35	Vinyl, card and thin sheet
2.11 × 3 in (54 × 76 mm)	1.7 mm	571 mm	15	Vinyl, card and thin sheet
2.82 × 4 in (72 × 102 mm)	2.2 mm	761 mm	8	Vinyl, card and thin sheet
4.22 × 6 in (107 × 152 mm)	3.4 mm	1,141 mm	2	Any material, including 3 mm wood and acrylic
5.63 × 8 in (143 × 203 mm)	4.5 mm	1,522 mm	2	Any material, including 3 mm wood and acrylic
8.45 × 12 in (215 × 305 mm)	6.7 mm	2,283 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Christmas tree SVG files

← Ribbon Christmas tree All 24 Christmas trees Spiral Christmas tree →