Free Christmas tree SVG

Christmas tree earring blank SVG

Christmas tree earring blank. The preview is the SVG file itself.

A small chunky tree with a ring at the tip for a hook or jump ring. Cut pairs from acrylic, leather or wood; the hole is 4 mm across at 100 mm tall.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	64 × 100 mm (2.5 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	332 mm at this size
Narrowest part	4.2 mm at this size
Nodes	62 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,298 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.64 × 1 in (16 × 25 mm)	1.1 mm	84 mm	140	Vinyl, card and thin sheet
1.27 × 2 in (32 × 51 mm)	2.1 mm	169 mm	40	Vinyl, card and thin sheet
1.9 × 3 in (48 × 76 mm)	3.2 mm	253 mm	15	Any material, including 3 mm wood and acrylic
2.54 × 4 in (65 × 102 mm)	4.3 mm	337 mm	8	Any material, including 3 mm wood and acrylic
3.81 × 6 in (97 × 152 mm)	6.4 mm	506 mm	3	Any material, including 3 mm wood and acrylic
5.08 × 8 in (129 × 203 mm)	8.5 mm	675 mm	2	Any material, including 3 mm wood and acrylic
7.62 × 12 in (194 × 305 mm)	13 mm	1,012 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Christmas tree SVG files

← Three Christmas trees in a row All 24 Christmas trees Slot-together standing Christmas tree →