Free Christmas tree SVG

Christmas tree outline with a star SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Christmas tree outline with a star, drawn as a line
Christmas tree outline with a star. The preview is the SVG file itself.

A four-tier tree with its star and trunk drawn as a single even line. The star and tree share one outline, so it cuts and plots without lifting.

What is in the file

Size67 × 100 mm (2.65 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length707 mm at this size
Narrowest part2.3 mm at this size
Nodes158 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,371 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.67 × 1 in (17 × 25 mm)0.58 mm180 mm130Fine detail: vinyl and paper only, weed with care
1.35 × 2 in (34 × 51 mm)1.2 mm359 mm35Vinyl, card and thin sheet
2.02 × 3 in (51 × 76 mm)1.8 mm539 mm15Vinyl, card and thin sheet
2.69 × 4 in (68 × 102 mm)2.3 mm718 mm8Vinyl, card and thin sheet
4.04 × 6 in (103 × 152 mm)3.5 mm1,077 mm2Any material, including 3 mm wood and acrylic
5.38 × 8 in (137 × 203 mm)4.7 mm1,437 mm2Any material, including 3 mm wood and acrylic
8.08 × 12 in (205 × 305 mm)7 mm2,155 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Christmas tree SVG files

← Christmas tree outline All 24 Christmas trees Christmas tree in a pot →