Free Christmas bell SVG

Pair of bells tied with a bow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pair of bells tied with a bow, as a solid black shape
Pair of bells tied with a bow. The preview is the SVG file itself.

Two bells swung apart and tied at the top with a ribbon bow whose forked tails lie over them. For Christmas, or as wedding bells on a card or an invitation.

What is in the file

Size100 × 73 mm (3.94 × 2.85 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length785 mm at this size
Narrowest part2.8 mm at this size
Nodes165 curve and line segments
Also found asWedding bells SVG

Measured from the file. PNG: 2,000 × 1,471 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.73 in (25 × 18 mm)0.71 mm199 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.45 in (51 × 37 mm)1.4 mm399 mm35Vinyl, card and thin sheet
3 × 2.17 in (76 × 55 mm)2.1 mm598 mm15Vinyl, card and thin sheet
4 × 2.9 in (102 × 74 mm)2.8 mm798 mm6Vinyl, card and thin sheet
6 × 4.35 in (152 × 110 mm)4.3 mm1,196 mm2Any material, including 3 mm wood and acrylic
8 × 5.8 in (203 × 147 mm)5.7 mm1,595 mm2Any material, including 3 mm wood and acrylic
12 × 8.7 in (305 × 221 mm)8.5 mm2,393 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Christmas bell SVG files

← Pair of Christmas bells with holly All 18 Christmas bells Jingle bell →