Free Christmas bell SVG

Christmas bell with a snowflake SVG

Christmas bell with a snowflake, as a solid black shape — Christmas bell with a snowflake. The preview is the SVG file itself.

A tall bell with a six-armed snowflake cut from its middle, a line at the lip and a ring on top.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	71 × 100 mm (2.78 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	697 mm at this size
Narrowest part	1.8 mm at this size
Nodes	191 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,437 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.71 × 1 in (18 × 25 mm)	0.46 mm	177 mm	130	Too fine for most machines
1.41 × 2 in (36 × 51 mm)	0.91 mm	354 mm	35	Fine detail: vinyl and paper only, weed with care
2.12 × 3 in (54 × 76 mm)	1.4 mm	531 mm	15	Vinyl, card and thin sheet
2.83 × 4 in (72 × 102 mm)	1.8 mm	708 mm	8	Vinyl, card and thin sheet
4.24 × 6 in (108 × 152 mm)	2.7 mm	1,062 mm	2	Vinyl, card and thin sheet
5.66 × 8 in (144 × 203 mm)	3.7 mm	1,416 mm	2	Any material, including 3 mm wood and acrylic
8.48 × 12 in (215 × 305 mm)	5.5 mm	2,124 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Christmas bell SVG files

← Christmas bell with stars All 18 Christmas bells Row of Christmas bells →