Free Christmas bell SVG

Pair of Christmas bells with holly SVG

Pair of Christmas bells with holly, as a solid black shape — Pair of Christmas bells with holly. The preview is the SVG file itself.

Two bells swung apart from one point, topped with two holly leaves and three berries. The front bell is set off from the back one by a thin gap.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 75 mm (3.94 × 2.96 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	496 mm at this size
Narrowest part	2.1 mm at this size
Nodes	179 curve and line segments

Measured from the file. PNG: 2,000 × 1,521 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.75 in (25 × 19 mm)	0.53 mm	126 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.5 in (51 × 38 mm)	1.1 mm	252 mm	35	Vinyl, card and thin sheet
3 × 2.25 in (76 × 57 mm)	1.6 mm	378 mm	12	Vinyl, card and thin sheet
4 × 3 in (102 × 76 mm)	2.1 mm	504 mm	6	Vinyl, card and thin sheet
6 × 4.51 in (152 × 114 mm)	3.2 mm	756 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.01 in (203 × 153 mm)	4.3 mm	1,008 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.01 in (305 × 229 mm)	6.4 mm	1,512 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Christmas bell SVG files

← Christmas bell with holly All 18 Christmas bells Pair of bells tied with a bow →