Free Christmas bell SVG

Christmas bell with a bow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Christmas bell with a bow, as a solid black shape
Christmas bell with a bow. The preview is the SVG file itself.

A bell hung from a ribbon bow whose two forked tails fall over its shoulders. A thin gap sets the tails off from the bell.

What is in the file

Size85 × 100 mm (3.33 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length723 mm at this size
Narrowest part3 mm at this size
Nodes125 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,702 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.85 × 1 in (21 × 25 mm)0.76 mm184 mm110Fine detail: vinyl and paper only, weed with care
1.69 × 2 in (43 × 51 mm)1.5 mm367 mm30Vinyl, card and thin sheet
2.54 × 3 in (64 × 76 mm)2.3 mm551 mm12Vinyl, card and thin sheet
3.38 × 4 in (86 × 102 mm)3 mm735 mm6Any material, including 3 mm wood and acrylic
5.07 × 6 in (129 × 152 mm)4.6 mm1,102 mm2Any material, including 3 mm wood and acrylic
6.76 × 8 in (172 × 203 mm)6.1 mm1,469 mm1Any material, including 3 mm wood and acrylic
10.14 × 12 in (258 × 305 mm)9.1 mm2,204 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Christmas bell SVG files

← Christmas bell outline All 18 Christmas bells Christmas bell with holly →