Free celtic knot SVG

Seamless Celtic knot band SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Seamless Celtic knot band, drawn as a line
Seamless Celtic knot band. The preview is the SVG file itself.

A plait of three strands, 100 mm long and about 27 mm tall, with seven repeats. Both ends are cut through plain strands at the same point in the pattern, so copies laid end to end weave on.

What is in the file

Size100 × 27 mm (3.94 × 1.08 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut26: 1 outer edge and 25 cut-outs
Cut length1,303 mm at this size
Narrowest part1 mm at this size
Nodes399 curve and line segments
Also found asKnotwork seamless SVG

Measured from the file. PNG: 2,000 × 604 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.27 in (25 × 7 mm)0.25 mm331 mm250Too fine for most machines
2 × 0.55 in (51 × 14 mm)0.51 mm662 mm80Fine detail: vinyl and paper only, weed with care
3 × 0.82 in (76 × 21 mm)0.76 mm993 mm33Fine detail: vinyl and paper only, weed with care
4 × 1.1 in (102 × 28 mm)1 mm1,324 mm18Vinyl, card and thin sheet
6 × 1.64 in (152 × 42 mm)1.5 mm1,986 mm6Vinyl, card and thin sheet
8 × 2.19 in (203 × 56 mm)2 mm2,648 mm5Vinyl, card and thin sheet
12 × 3.29 in (305 × 84 mm)3 mm3,972 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More celtic knot SVG files

← Celtic shamrock knot All 20 celtic knots Celtic tree of life in a knot ring →