Free celtic knot SVG

Celtic tree on a trinity knot SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Celtic tree on a trinity knot, as a solid black shape
Celtic tree on a trinity knot. The preview is the SVG file itself.

The same spiral-branched tree with a trinity knot in place of its roots: the trunk rises from the top point of the knot. Taller than it is wide, for a bookmark, a pendant or a door plaque.

What is in the file

Size96 × 100 mm (3.77 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length1,586 mm at this size
Narrowest part2.1 mm at this size
Nodes294 curve and line segments

Measured from the file. PNG: 1,919 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)0.53 mm403 mm100Fine detail: vinyl and paper only, weed with care
1.92 × 2 in (49 × 51 mm)1.1 mm806 mm25Vinyl, card and thin sheet
2.87 × 3 in (73 × 76 mm)1.6 mm1,209 mm9Vinyl, card and thin sheet
3.83 × 4 in (97 × 102 mm)2.1 mm1,611 mm6Vinyl, card and thin sheet
5.75 × 6 in (146 × 152 mm)3.2 mm2,417 mm2Any material, including 3 mm wood and acrylic
7.66 × 8 in (195 × 203 mm)4.3 mm3,223 mm1Any material, including 3 mm wood and acrylic
11.5 × 12 in (292 × 305 mm)6.4 mm4,834 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More celtic knot SVG files

← Celtic tree of life in a knot ring All 20 celtic knots Celtic knot stencil plate →