Free candle SVG

Kwanzaa candles in a kinara SVG

Kwanzaa candles in a kinara, as a solid black shape — Kwanzaa candles in a kinara. The preview is the SVG file itself.

Seven candles in a kinara, stepping up to the tallest in the middle, each in its own cup on a long bar with a spreading foot. Cut the flames separately to colour three red, one black and three green.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 76 mm (3.94 × 2.99 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	1,003 mm at this size
Narrowest part	1.9 mm at this size
Nodes	217 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,538 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.76 in (25 × 19 mm)	0.48 mm	255 mm	120	Too fine for most machines
2 × 1.52 in (51 × 39 mm)	0.97 mm	510 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.28 in (76 × 58 mm)	1.4 mm	764 mm	12	Vinyl, card and thin sheet
4 × 3.04 in (102 × 77 mm)	1.9 mm	1,019 mm	6	Vinyl, card and thin sheet
6 × 4.56 in (152 × 116 mm)	2.9 mm	1,529 mm	2	Vinyl, card and thin sheet
8 × 6.08 in (203 × 154 mm)	3.9 mm	2,038 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.12 in (305 × 232 mm)	5.8 mm	3,057 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More candle SVG files

← Jar candle with a blank label All 16 candles Menorah with nine candles →