Free candle SVG

Candle outline SVG

Candle outline, drawn as a line
Candle outline. The preview is the SVG file itself.

The pillar candle as one joined line: the body, the cap of wax with its two drips, the wick, the flame and its inner flame, and the dish below. For colouring pages, foil and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size52 × 100 mm (2.04 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length702 mm at this size
Narrowest part2 mm at this size
Nodes94 curve and line segments

Measured from the file. PNG: 1,073 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.52 × 1 in (13 × 25 mm)0.51 mm178 mm160Fine detail: vinyl and paper only, weed with care
1.04 × 2 in (26 × 51 mm)1 mm357 mm45Vinyl, card and thin sheet
1.55 × 3 in (39 × 76 mm)1.5 mm535 mm18Vinyl, card and thin sheet
2.07 × 4 in (53 × 102 mm)2 mm713 mm10Vinyl, card and thin sheet
3.11 × 6 in (79 × 152 mm)3 mm1,070 mm3Any material, including 3 mm wood and acrylic
4.14 × 8 in (105 × 203 mm)4.1 mm1,426 mm2Any material, including 3 mm wood and acrylic
6.22 × 12 in (158 × 305 mm)6.1 mm2,140 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More candle SVG files

← Diya oil lamp All 16 candles Layered candle holder in four colours →