Halloween candle holder with a web SVG
The candelabra gone to ruin: wax dripping from the candles and off the cups, a cobweb strung between the middle candle and the left one, and a spider hanging from the cup on the right.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 79 × 100 mm (3.11 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 11: 1 outer edge and 10 cut-outs |
| Cut length | 936 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 211 curve and line segments |
Measured from the file. PNG: 1,598 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.79 × 1 in (20 × 25 mm) | 0.51 mm | 238 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 1.58 × 2 in (40 × 51 mm) | 1 mm | 475 mm | 30 | Vinyl, card and thin sheet |
| 2.37 × 3 in (60 × 76 mm) | 1.5 mm | 713 mm | 12 | Vinyl, card and thin sheet |
| 3.16 × 4 in (80 × 102 mm) | 2 mm | 951 mm | 6 | Vinyl, card and thin sheet |
| 4.75 × 6 in (121 × 152 mm) | 3 mm | 1,426 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.33 × 8 in (161 × 203 mm) | 4.1 mm | 1,902 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.49 × 12 in (241 × 305 mm) | 6.1 mm | 2,853 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More candle SVG files
-
Christmas candle with holly Solid · one piece -
Diya oil lamp Solid · one piece -
Candle outline Outline · one piece -
Layered candle holder in four colours Layered · 4 pieces -
Pillar candle with dripping wax Solid · one piece -
Candle silhouette Solid · one piece -
Three candles Solid · one piece -
Candlestick with a taper candle Solid · one piece
← Candelabra with three candles All 16 candles Christmas candle with holly →