Free But First Coffee SVG

But First Coffee in Alfa Slab One SVG

But First Coffee in Alfa Slab One, as a solid black shape
But First Coffee in Alfa Slab One. The preview is the SVG file itself.

“But First Coffee” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 43 mm (3.94 × 1.69 in), scales to any size
Pieces14 separate pieces
Outlines to cut19: 14 outer edges and 5 cut-outs
Cut length879 mm at this size
Narrowest part1.8 mm at this size
Nodes443 curve and line segments

Measured from the file. PNG: 2,000 × 902 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)0.46 mm223 mm190Too fine for most machines
2 × 0.86 in (51 × 22 mm)0.91 mm447 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.29 in (76 × 33 mm)1.4 mm670 mm24Vinyl, card and thin sheet
4 × 1.72 in (102 × 44 mm)1.8 mm893 mm12Vinyl, card and thin sheet
6 × 2.57 in (152 × 65 mm)2.7 mm1,340 mm4Vinyl, card and thin sheet
8 × 3.43 in (203 × 87 mm)3.7 mm1,786 mm3Any material, including 3 mm wood and acrylic
12 × 5.15 in (305 × 131 mm)5.5 mm2,679 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More But First Coffee SVG files

← But First Coffee in Lilita One All 12 But First Coffee designs But First Coffee in Amatic SC →