Free But First Coffee SVG

But First Coffee in Amatic SC SVG

But First Coffee in Amatic SC, as a solid black shape
But First Coffee in Amatic SC. The preview is the SVG file itself.

“But First Coffee” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 81 mm (3.94 × 3.19 in), scales to any size
Pieces14 separate pieces
Outlines to cut18: 14 outer edges and 4 cut-outs
Cut length1,335 mm at this size
Narrowest part1.9 mm at this size
Nodes504 curve and line segments

Measured from the file. PNG: 2,000 × 1,633 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.81 in (25 × 21 mm)0.48 mm339 mm120Too fine for most machines
2 × 1.62 in (51 × 41 mm)0.97 mm678 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.43 in (76 × 62 mm)1.4 mm1,017 mm12Vinyl, card and thin sheet
4 × 3.24 in (102 × 82 mm)1.9 mm1,356 mm6Vinyl, card and thin sheet
6 × 4.85 in (152 × 123 mm)2.9 mm2,035 mm2Vinyl, card and thin sheet
8 × 6.47 in (203 × 164 mm)3.9 mm2,713 mm1Any material, including 3 mm wood and acrylic
12 × 9.71 in (305 × 247 mm)5.8 mm4,069 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More But First Coffee SVG files

← But First Coffee in Alfa Slab One All 12 But First Coffee designs But First Coffee in block capitals →