Free But First Coffee SVG

But First Coffee outline lettering SVG

But First Coffee outline lettering, drawn as a line
But First Coffee outline lettering. The preview is the SVG file itself.

“But First Coffee” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 47 mm (3.94 × 1.85 in), scales to any size
Pieces16 separate pieces
Outlines to cut42: 16 outer edges and 26 cut-outs
Cut length1,342 mm at this size
Narrowest part1.7 mm at this size
Nodes629 curve and line segments

Measured from the file. PNG: 2,000 × 983 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.47 in (25 × 12 mm)0.43 mm341 mm180Too fine for most machines
2 × 0.94 in (51 × 24 mm)0.86 mm682 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.41 in (76 × 36 mm)1.3 mm1,023 mm21Vinyl, card and thin sheet
4 × 1.88 in (102 × 48 mm)1.7 mm1,363 mm10Vinyl, card and thin sheet
6 × 2.83 in (152 × 72 mm)2.6 mm2,045 mm4Vinyl, card and thin sheet
8 × 3.77 in (203 × 96 mm)3.5 mm2,727 mm3Any material, including 3 mm wood and acrylic
12 × 5.65 in (305 × 144 mm)5.2 mm4,090 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More But First Coffee SVG files

← But First Coffee with hearts All 12 But First Coffee designs But First Coffee stencil plate →