Free But First Coffee SVG

But First Coffee in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

But First Coffee in Lilita One, as a solid black shape
But First Coffee in Lilita One. The preview is the SVG file itself.

“But First Coffee” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 50 mm (3.94 × 1.98 in), scales to any size
Pieces15 separate pieces
Outlines to cut20: 15 outer edges and 5 cut-outs
Cut length866 mm at this size
Narrowest part3.1 mm at this size
Nodes283 curve and line segments

Measured from the file. PNG: 2,000 × 1,044 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.5 in (25 × 13 mm)0.79 mm220 mm170Fine detail: vinyl and paper only, weed with care
2 × 1.01 in (51 × 26 mm)1.6 mm440 mm50Vinyl, card and thin sheet
3 × 1.51 in (76 × 38 mm)2.4 mm660 mm21Vinyl, card and thin sheet
4 × 2.01 in (102 × 51 mm)3.1 mm880 mm10Any material, including 3 mm wood and acrylic
6 × 3.02 in (152 × 77 mm)4.7 mm1,320 mm3Any material, including 3 mm wood and acrylic
8 × 4.02 in (203 × 102 mm)6.3 mm1,760 mm2Any material, including 3 mm wood and acrylic
12 × 6.04 in (305 × 153 mm)9.4 mm2,640 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More But First Coffee SVG files

← But First Coffee in Kaushan Script All 13 But First Coffee designs But First Coffee in Alfa Slab One →