Broom Hair Don’t Care outline lettering SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Broom Hair Don’t Care” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.
What is in the file
| Size | 100 × 36 mm (3.94 × 1.42 in), scales to any size |
|---|---|
| Pieces | 23 separate pieces |
| Outlines to cut | 64: 23 outer edges and 41 cut-outs |
| Cut length | 1,382 mm at this size |
| Narrowest part | 0.9 mm at this size |
| Nodes | 581 curve and line segments |
Measured from the file. PNG: 2,000 × 769 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.36 in (25 × 9 mm) | 0.23 mm | 351 mm | 210 | Too fine for most machines |
| 2 × 0.72 in (51 × 18 mm) | 0.46 mm | 702 mm | 65 | Too fine for most machines |
| 3 × 1.08 in (76 × 27 mm) | 0.69 mm | 1,053 mm | 27 | Fine detail: vinyl and paper only, weed with care |
| 4 × 1.44 in (102 × 37 mm) | 0.91 mm | 1,404 mm | 14 | Fine detail: vinyl and paper only, weed with care |
| 6 × 2.16 in (152 × 55 mm) | 1.4 mm | 2,106 mm | 5 | Vinyl, card and thin sheet |
| 8 × 2.88 in (203 × 73 mm) | 1.8 mm | 2,808 mm | 3 | Vinyl, card and thin sheet |
| 12 × 4.32 in (305 × 110 mm) | 2.7 mm | 4,212 mm | 2 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Broom Hair Don’t Care SVG files
-
Broom Hair Don’t Care stencil plate Solid · one piece
-
Broom Hair Don’t Care with a drop shadow Layered · 14 pieces
-
Broom Hair Don’t Care with a witch’s hat Solid · 14 pieces
-
Broom Hair Don’t Care in Pacifico Solid · 9 pieces
-
Broom Hair Don’t Care in Lobster Solid · 12 pieces
-
Broom Hair Don’t Care in Kaushan Script Solid · 19 pieces
-
Broom Hair Don’t Care in Lilita One Solid · 19 pieces
-
Broom Hair Don’t Care in Alfa Slab One Solid · 19 pieces
← Broom Hair Don’t Care with stars All 13 Broom Hair Don’t Care designs Broom Hair Don’t Care stencil plate →