Free Broom Hair Don’t Care SVG

Broom Hair Don’t Care stencil plate SVG

Broom Hair Don’t Care stencil plate, as a solid black shape
Broom Hair Don’t Care stencil plate. The preview is the SVG file itself.

A rounded plate with “BROOM HAIR DON’T CARE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 51 mm (3.94 × 2 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut19: 1 outer edge and 18 cut-outs
Cut length1,257 mm at this size
Narrowest part1.7 mm at this size
Nodes399 curve and line segments

Measured from the file. PNG: 2,000 × 1,052 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.51 in (25 × 13 mm)0.43 mm319 mm170Too fine for most machines
2 × 1.01 in (51 × 26 mm)0.86 mm639 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.52 in (76 × 39 mm)1.3 mm958 mm21Vinyl, card and thin sheet
4 × 2.03 in (102 × 52 mm)1.7 mm1,277 mm10Vinyl, card and thin sheet
6 × 3.04 in (152 × 77 mm)2.6 mm1,916 mm3Vinyl, card and thin sheet
8 × 4.06 in (203 × 103 mm)3.5 mm2,554 mm2Any material, including 3 mm wood and acrylic
12 × 6.08 in (305 × 155 mm)5.2 mm3,831 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Broom Hair Don’t Care SVG files

← Broom Hair Don’t Care outline lettering All 12 Broom Hair Don’t Care designs Broom Hair Don’t Care with a drop shadow →