Broom Hair Don’t Care with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Broom Hair Don’t Care” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 49 mm (3.94 × 1.94 in), scales to any size |
|---|---|
| Pieces | 14 separate pieces |
| Outlines to cut | 27: 14 outer edges and 13 cut-outs |
| Cut length | 1,650 mm at this size |
| Narrowest part | 1.1 mm at this size |
| Nodes | 591 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,025 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.49 in (25 × 13 mm) | 0.28 mm | 419 mm | 170 | Too fine for most machines |
| 2 × 0.99 in (51 × 25 mm) | 0.56 mm | 838 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.48 in (76 × 38 mm) | 0.84 mm | 1,257 mm | 21 | Fine detail: vinyl and paper only, weed with care |
| 4 × 1.97 in (102 × 50 mm) | 1.1 mm | 1,676 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.96 in (152 × 75 mm) | 1.7 mm | 2,515 mm | 3 | Vinyl, card and thin sheet |
| 8 × 3.94 in (203 × 100 mm) | 2.2 mm | 3,353 mm | 2 | Vinyl, card and thin sheet |
| 12 × 5.92 in (305 × 150 mm) | 3.4 mm | 5,029 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Broom Hair Don’t Care SVG files
-
Broom Hair Don’t Care with a witch’s hat Solid · 14 pieces
-
Broom Hair Don’t Care in Pacifico Solid · 9 pieces
-
Broom Hair Don’t Care in Lobster Solid · 12 pieces
-
Broom Hair Don’t Care in Kaushan Script Solid · 19 pieces
-
Broom Hair Don’t Care in Lilita One Solid · 19 pieces
-
Broom Hair Don’t Care in Alfa Slab One Solid · 19 pieces
-
Broom Hair Don’t Care in Amatic SC Solid · 18 pieces
-
Broom Hair Don’t Care in block capitals Solid · 18 pieces
← Broom Hair Don’t Care stencil plate All 13 Broom Hair Don’t Care designs Broom Hair Don’t Care with a witch’s hat →