Free Broom Hair Don’t Care SVG

Broom Hair Don’t Care with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Broom Hair Don’t Care with stars, as a solid black shape
Broom Hair Don’t Care with stars. The preview is the SVG file itself.

“Broom Hair Don’t Care” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 79 mm (3.94 × 3.1 in), scales to any size
Pieces18 separate pieces
Outlines to cut24: 18 outer edges and 6 cut-outs
Cut length1,293 mm at this size
Narrowest part0.9 mm at this size
Nodes408 curve and line segments

Measured from the file. PNG: 2,000 × 1,592 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.79 in (25 × 20 mm)0.23 mm328 mm120Too fine for most machines
2 × 1.58 in (51 × 40 mm)0.46 mm657 mm30Too fine for most machines
3 × 2.36 in (76 × 60 mm)0.69 mm985 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.15 in (102 × 80 mm)0.91 mm1,314 mm6Fine detail: vinyl and paper only, weed with care
6 × 4.73 in (152 × 120 mm)1.4 mm1,971 mm2Vinyl, card and thin sheet
8 × 6.3 in (203 × 160 mm)1.8 mm2,627 mm1Vinyl, card and thin sheet
12 × 9.46 in (305 × 240 mm)2.7 mm3,941 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Broom Hair Don’t Care SVG files

← Broom Hair Don’t Care in script and capitals All 13 Broom Hair Don’t Care designs Broom Hair Don’t Care outline lettering →