Free Boss Lady SVG

Boss Lady in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boss Lady in Alfa Slab One, as a solid black shape
Boss Lady in Alfa Slab One. The preview is the SVG file itself.

“Boss Lady” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 87 mm (3.94 × 3.43 in), scales to any size
Pieces8 separate pieces
Outlines to cut13: 8 outer edges and 5 cut-outs
Cut length1,022 mm at this size
Narrowest part3.8 mm at this size
Nodes184 curve and line segments

Measured from the file. PNG: 2,000 × 1,752 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.87 in (25 × 22 mm)0.97 mm260 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.74 in (51 × 44 mm)1.9 mm519 mm30Vinyl, card and thin sheet
3 × 2.61 in (76 × 66 mm)2.9 mm779 mm12Vinyl, card and thin sheet
4 × 3.48 in (102 × 88 mm)3.9 mm1,038 mm6Any material, including 3 mm wood and acrylic
6 × 5.23 in (152 × 133 mm)5.8 mm1,558 mm2Any material, including 3 mm wood and acrylic
8 × 6.97 in (203 × 177 mm)7.7 mm2,077 mm1Any material, including 3 mm wood and acrylic
12 × 10.45 in (305 × 265 mm)12 mm3,115 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Boss Lady SVG files

← Boss Lady in Lilita One All 13 Boss Lady designs Boss Lady in Amatic SC →