Free Boss Lady SVG

Boss Lady stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boss Lady stencil plate, as a solid black shape
Boss Lady stencil plate. The preview is the SVG file itself.

A rounded plate with “BOSS LADY” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 91 mm (3.94 × 3.58 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length1,462 mm at this size
Narrowest part1.7 mm at this size
Nodes216 curve and line segments

Measured from the file. PNG: 2,000 × 1,827 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.91 in (25 × 23 mm)0.43 mm371 mm100Too fine for most machines
2 × 1.82 in (51 × 46 mm)0.86 mm743 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.73 in (76 × 69 mm)1.3 mm1,114 mm12Vinyl, card and thin sheet
4 × 3.64 in (102 × 92 mm)1.7 mm1,485 mm6Vinyl, card and thin sheet
6 × 5.46 in (152 × 139 mm)2.6 mm2,228 mm2Vinyl, card and thin sheet
8 × 7.28 in (203 × 185 mm)3.5 mm2,971 mm1Any material, including 3 mm wood and acrylic
12 × 10.92 in (305 × 277 mm)5.2 mm4,456 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Boss Lady SVG files

← Boss Lady outline lettering All 13 Boss Lady designs Boss Lady with a drop shadow →