Free Boss Lady SVG

Boss Lady in block capitals SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boss Lady in block capitals, as a solid black shape
Boss Lady in block capitals. The preview is the SVG file itself.

“BOSS LADY” in the tall, narrow capitals of Bebas Neue, with every line stretched to the same width so the words form a solid block. Each letter is a separate piece with thick, even strokes.

What is in the file

Size98 × 100 mm (3.87 × 3.94 in), scales to any size
Pieces8 separate pieces
Outlines to cut13: 8 outer edges and 5 cut-outs
Cut length1,464 mm at this size
Narrowest part5.4 mm at this size
Nodes155 curve and line segments

Measured from the file. PNG: 1,967 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.98 × 1 in (25 × 25 mm)1.4 mm372 mm100Vinyl, card and thin sheet
1.97 × 2 in (50 × 51 mm)2.7 mm744 mm25Vinyl, card and thin sheet
2.95 × 3 in (75 × 76 mm)4.1 mm1,116 mm9Any material, including 3 mm wood and acrylic
3.93 × 4 in (100 × 102 mm)5.5 mm1,487 mm4Any material, including 3 mm wood and acrylic
5.9 × 6 in (150 × 152 mm)8.2 mm2,231 mm2Any material, including 3 mm wood and acrylic
7.86 × 8 in (200 × 203 mm)11 mm2,975 mm1Any material, including 3 mm wood and acrylic
11.8 × 12 in (300 × 305 mm)16 mm4,462 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Boss Lady SVG files

← Boss Lady in Amatic SC All 13 Boss Lady designs Boss Lady in script and capitals →