Free Boss Lady SVG

Boss Lady in script and capitals SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boss Lady in script and capitals, as a solid black shape
Boss Lady in script and capitals. The preview is the SVG file itself.

“Boss” in Pacifico script over “LADY” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

What is in the file

Size100 × 94 mm (3.94 × 3.71 in), scales to any size
Pieces7 separate pieces
Outlines to cut10: 7 outer edges and 3 cut-outs
Cut length1,242 mm at this size
Narrowest part3.9 mm at this size
Nodes175 curve and line segments

Measured from the file. PNG: 2,000 × 1,890 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.94 in (25 × 24 mm)0.99 mm315 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.89 in (51 × 48 mm)2 mm631 mm25Vinyl, card and thin sheet
3 × 2.83 in (76 × 72 mm)3 mm946 mm12Vinyl, card and thin sheet
4 × 3.77 in (102 × 96 mm)4 mm1,262 mm6Any material, including 3 mm wood and acrylic
6 × 5.66 in (152 × 144 mm)5.9 mm1,893 mm2Any material, including 3 mm wood and acrylic
8 × 7.54 in (203 × 192 mm)7.9 mm2,524 mm1Any material, including 3 mm wood and acrylic
12 × 11.32 in (305 × 287 mm)12 mm3,786 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Boss Lady SVG files

← Boss Lady in block capitals All 13 Boss Lady designs Boss Lady with stars →