Free Blessed Mama SVG

Blessed Mama stencil plate SVG

Blessed Mama stencil plate, as a solid black shape — Blessed Mama stencil plate. The preview is the SVG file itself.

A rounded plate with “BLESSED MAMA” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 71 mm (3.94 × 2.78 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	1,528 mm at this size
Narrowest part	1.5 mm at this size
Nodes	187 curve and line segments

Measured from the file. PNG: 2,000 × 1,435 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.71 in (25 × 18 mm)	0.38 mm	388 mm	130	Too fine for most machines
2 × 1.41 in (51 × 36 mm)	0.76 mm	776 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.12 in (76 × 54 mm)	1.1 mm	1,164 mm	15	Vinyl, card and thin sheet
4 × 2.82 in (102 × 72 mm)	1.5 mm	1,552 mm	8	Vinyl, card and thin sheet
6 × 4.24 in (152 × 108 mm)	2.3 mm	2,329 mm	2	Vinyl, card and thin sheet
8 × 5.65 in (203 × 143 mm)	3 mm	3,105 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.47 in (305 × 215 mm)	4.6 mm	4,657 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Blessed Mama SVG files

← Blessed Mama outline lettering All 12 Blessed Mama designs Blessed Mama with a drop shadow →