Free Blessed Mama SVG

Blessed Mama in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Blessed Mama in Lilita One, as a solid black shape
Blessed Mama in Lilita One. The preview is the SVG file itself.

“Blessed Mama” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 56 mm (3.94 × 2.2 in), scales to any size
Pieces11 separate pieces
Outlines to cut18: 11 outer edges and 7 cut-outs
Cut length916 mm at this size
Narrowest part3.2 mm at this size
Nodes254 curve and line segments

Measured from the file. PNG: 2,000 × 1,154 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.56 in (25 × 14 mm)0.81 mm233 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.12 in (51 × 28 mm)1.6 mm465 mm45Vinyl, card and thin sheet
3 × 1.68 in (76 × 43 mm)2.4 mm698 mm18Vinyl, card and thin sheet
4 × 2.24 in (102 × 57 mm)3.3 mm931 mm10Any material, including 3 mm wood and acrylic
6 × 3.36 in (152 × 85 mm)4.9 mm1,396 mm3Any material, including 3 mm wood and acrylic
8 × 4.48 in (203 × 114 mm)6.5 mm1,861 mm2Any material, including 3 mm wood and acrylic
12 × 6.72 in (305 × 171 mm)9.8 mm2,792 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Blessed Mama SVG files

← Blessed Mama in Kaushan Script All 13 Blessed Mama designs Blessed Mama in Alfa Slab One →