Free Blessed Mama SVG

Blessed Mama in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Blessed Mama in Alfa Slab One, as a solid black shape
Blessed Mama in Alfa Slab One. The preview is the SVG file itself.

“Blessed Mama” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 50 mm (3.94 × 1.98 in), scales to any size
Pieces11 separate pieces
Outlines to cut18: 11 outer edges and 7 cut-outs
Cut length980 mm at this size
Narrowest part2.2 mm at this size
Nodes255 curve and line segments

Measured from the file. PNG: 2,000 × 1,044 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.5 in (25 × 13 mm)0.56 mm249 mm170Fine detail: vinyl and paper only, weed with care
2 × 1.01 in (51 × 26 mm)1.1 mm498 mm50Vinyl, card and thin sheet
3 × 1.51 in (76 × 38 mm)1.7 mm747 mm21Vinyl, card and thin sheet
4 × 2.01 in (102 × 51 mm)2.2 mm996 mm10Vinyl, card and thin sheet
6 × 3.02 in (152 × 77 mm)3.4 mm1,494 mm3Any material, including 3 mm wood and acrylic
8 × 4.02 in (203 × 102 mm)4.5 mm1,991 mm2Any material, including 3 mm wood and acrylic
12 × 6.04 in (305 × 153 mm)6.7 mm2,987 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Blessed Mama SVG files

← Blessed Mama in Lilita One All 13 Blessed Mama designs Blessed Mama in Amatic SC →