Free Blessed Mama SVG

Blessed Mama in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Blessed Mama in Amatic SC, as a solid black shape
Blessed Mama in Amatic SC. The preview is the SVG file itself.

“Blessed Mama” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces11 separate pieces
Outlines to cut16: 11 outer edges and 5 cut-outs
Cut length1,585 mm at this size
Narrowest part2.4 mm at this size
Nodes448 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.61 mm403 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)1.2 mm805 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)1.8 mm1,208 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)2.4 mm1,610 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)3.7 mm2,416 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)4.9 mm3,221 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)7.3 mm4,831 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Blessed Mama SVG files

← Blessed Mama in Alfa Slab One All 13 Blessed Mama designs Blessed Mama in block capitals →