Free bag topper SVG

Wide bag topper with three hearts SVG

Wide bag topper with three hearts, as a solid black shape
Wide bag topper with three hearts. The preview is the SVG file itself.

A wide topper whose front ends in two long curves, with three hearts cut from it and a shorter back. Slip coloured paper inside so that the hearts show. Cut 130 mm wide, it folds to 130 by 44 mm, for a bag 125 mm wide.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 61 mm (3.94 × 2.39 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut22: 1 outer edge and 21 cut-outs
Cut length537 mm at this size
Narrowest part2.4 mm at this size
Nodes118 curve and line segments
SymmetryMirror
Also found asTreat bag topper SVG

Measured from the file. PNG: 2,000 × 1,246 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.61 in (25 × 15 mm)0.61 mm136 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.22 in (51 × 31 mm)1.2 mm273 mm40Vinyl, card and thin sheet
3 × 1.82 in (76 × 46 mm)1.8 mm409 mm18Vinyl, card and thin sheet
4 × 2.43 in (102 × 62 mm)2.4 mm546 mm8Vinyl, card and thin sheet
6 × 3.65 in (152 × 93 mm)3.7 mm818 mm3Any material, including 3 mm wood and acrylic
8 × 4.86 in (203 × 124 mm)4.9 mm1,091 mm2Any material, including 3 mm wood and acrylic
12 × 7.3 in (305 × 185 mm)7.3 mm1,637 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bag topper SVG files

← Bag topper with a scalloped edge All 13 bag toppers Hanging bag topper with a peg slot →