Free baby bottle SVG

Baby bib with a bottle SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Baby bib with a bottle, as a solid black shape
Baby bib with a bottle. The preview is the SVG file itself.

A bib with a round neck, a snap at the back, a crumb pocket marked across the bottom and a little bottle cut out of the middle. The same on both sides.

What is in the file

Size84 × 100 mm (3.3 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length602 mm at this size
Narrowest part1.9 mm at this size
Nodes67 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,690 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.84 × 1 in (21 × 25 mm)0.48 mm153 mm110Too fine for most machines
1.68 × 2 in (43 × 51 mm)0.97 mm306 mm30Fine detail: vinyl and paper only, weed with care
2.52 × 3 in (64 × 76 mm)1.4 mm459 mm12Vinyl, card and thin sheet
3.36 × 4 in (85 × 102 mm)1.9 mm612 mm6Vinyl, card and thin sheet
5.03 × 6 in (128 × 152 mm)2.9 mm917 mm2Vinyl, card and thin sheet
6.71 × 8 in (170 × 203 mm)3.9 mm1,223 mm1Any material, including 3 mm wood and acrylic
10.07 × 12 in (256 × 305 mm)5.8 mm1,835 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More baby bottle SVG files

← Baby ring rattle with beads All 17 baby bottles Baby diaper with a heart →