Free baby bottle SVG

Baby bottle with measure marks SVG

Baby bottle with measure marks, as a solid black shape
Baby bottle with measure marks. The preview is the SVG file itself.

A feeding bottle standing upright: a round-shouldered body, a ridged collar and a teat. Six measure ticks run up one side with no numbers on them, and a highlight runs up the other.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size39 × 100 mm (1.53 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length510 mm at this size
Narrowest part3.9 mm at this size
Nodes84 curve and line segments

Measured from the file. PNG: 823 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.39 × 1 in (10 × 25 mm)0.99 mm130 mm200Fine detail: vinyl and paper only, weed with care
0.78 × 2 in (20 × 51 mm)2 mm259 mm60Vinyl, card and thin sheet
1.16 × 3 in (30 × 76 mm)3 mm389 mm24Vinyl, card and thin sheet
1.55 × 4 in (39 × 102 mm)4 mm518 mm12Any material, including 3 mm wood and acrylic
2.33 × 6 in (59 × 152 mm)5.9 mm777 mm4Any material, including 3 mm wood and acrylic
3.1 × 8 in (79 × 203 mm)7.9 mm1,036 mm3Any material, including 3 mm wood and acrylic
4.66 × 12 in (118 × 305 mm)12 mm1,554 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More baby bottle SVG files

← Layered baby bottle in four colours All 17 baby bottles Baby bottle silhouette →