Free baby bottle SVG

Baby bottle outline SVG

Baby bottle outline, drawn as a line
Baby bottle outline. The preview is the SVG file itself.

The bottle as an even line: body, collar with five ridges and the teat, with six measure ticks joined to one side. The same on both sides apart from the ticks. For colouring, foil and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size39 × 100 mm (1.53 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length744 mm at this size
Narrowest part1.9 mm at this size
Nodes106 curve and line segments

Measured from the file. PNG: 823 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.39 × 1 in (10 × 25 mm)0.48 mm189 mm200Too fine for most machines
0.78 × 2 in (20 × 51 mm)0.97 mm378 mm60Fine detail: vinyl and paper only, weed with care
1.16 × 3 in (30 × 76 mm)1.4 mm567 mm24Vinyl, card and thin sheet
1.55 × 4 in (39 × 102 mm)1.9 mm756 mm12Vinyl, card and thin sheet
2.33 × 6 in (59 × 152 mm)2.9 mm1,134 mm4Vinyl, card and thin sheet
3.1 × 8 in (79 × 203 mm)3.9 mm1,512 mm3Any material, including 3 mm wood and acrylic
4.66 × 12 in (118 × 305 mm)5.8 mm2,268 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More baby bottle SVG files

← Baby bottle silhouette All 17 baby bottles Baby bottle with a heart →