Leaves and Pumpkins Please stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “AUTUMN LEAVES AND PUMPKINS PLEASE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 72 mm (3.94 × 2.84 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 30: 1 outer edge and 29 cut-outs |
| Cut length | 1,683 mm at this size |
| Narrowest part | 1.1 mm at this size |
| Nodes | 553 curve and line segments |
Measured from the file. PNG: 2,000 × 1,465 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.72 in (25 × 18 mm) | 0.28 mm | 427 mm | 130 | Too fine for most machines |
| 2 × 1.44 in (51 × 37 mm) | 0.56 mm | 855 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.17 in (76 × 55 mm) | 0.84 mm | 1,282 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.89 in (102 × 73 mm) | 1.1 mm | 1,710 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.33 in (152 × 110 mm) | 1.7 mm | 2,565 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.78 in (203 × 147 mm) | 2.2 mm | 3,420 mm | 2 | Vinyl, card and thin sheet |
| 12 × 8.66 in (305 × 220 mm) | 3.4 mm | 5,130 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Autumn Leaves and Pumpkins Please SVG files
-
Leaves and Pumpkins Please with a drop shadow Layered · 11 pieces -
Leaves and Pumpkins Please in Pacifico Solid · 8 pieces -
Leaves and Pumpkins Please in Lobster Solid · 12 pieces -
Leaves and Pumpkins Please in Kaushan Script Solid · 5 pieces -
Leaves and Pumpkins Please in Lilita One Solid · 30 pieces -
Leaves and Pumpkins Please in Alfa Slab One Solid · 5 pieces -
Leaves and Pumpkins Please in Amatic SC Solid · 29 pieces -
Leaves and Pumpkins Please in block capitals Solid · 29 pieces
← Leaves and Pumpkins Please outline lettering All 12 Autumn Leaves and Pumpkins Please designs Leaves and Pumpkins Please with a drop shadow →