Free Autumn Leaves and Pumpkins Please SVG

Leaves and Pumpkins Please in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Leaves and Pumpkins Please in Amatic SC, as a solid black shape
Leaves and Pumpkins Please in Amatic SC. The preview is the SVG file itself.

“Autumn Leaves and Pumpkins Please” set in Amatic SC, narrow hand-drawn capitals, on 3 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 75 mm (3.94 × 2.95 in), scales to any size
Pieces29 separate pieces
Outlines to cut37: 29 outer edges and 8 cut-outs
Cut length1,917 mm at this size
Narrowest part1 mm at this size
Nodes799 curve and line segments

Measured from the file. PNG: 2,000 × 1,517 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.75 in (25 × 19 mm)0.25 mm487 mm120Too fine for most machines
2 × 1.5 in (51 × 38 mm)0.51 mm974 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.25 in (76 × 57 mm)0.76 mm1,461 mm12Fine detail: vinyl and paper only, weed with care
4 × 3 in (102 × 76 mm)1 mm1,948 mm6Vinyl, card and thin sheet
6 × 4.49 in (152 × 114 mm)1.5 mm2,922 mm2Vinyl, card and thin sheet
8 × 5.99 in (203 × 152 mm)2 mm3,895 mm1Vinyl, card and thin sheet
12 × 8.99 in (305 × 228 mm)3 mm5,843 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Autumn Leaves and Pumpkins Please SVG files

← Leaves and Pumpkins Please in Alfa Slab One All 13 Autumn Leaves and Pumpkins Please designs Leaves and Pumpkins Please in block capitals →