Free Autumn Leaves and Pumpkins Please SVG

Leaves and Pumpkins Please with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Leaves and Pumpkins Please with a drop shadow, in layered colours
Leaves and Pumpkins Please with a drop shadow. The preview is the SVG file itself.

“Autumn Leaves and Pumpkins Please” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size100 × 67 mm (3.94 × 2.63 in), scales to any size
Pieces11 separate pieces
Outlines to cut29: 11 outer edges and 18 cut-outs
Cut length2,003 mm at this size
Narrowest part2 mm at this size
Nodes853 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,360 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.67 in (25 × 17 mm)0.51 mm509 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.33 in (51 × 34 mm)1 mm1,018 mm35Vinyl, card and thin sheet
3 × 2 in (76 × 51 mm)1.5 mm1,526 mm15Vinyl, card and thin sheet
4 × 2.67 in (102 × 68 mm)2 mm2,035 mm8Vinyl, card and thin sheet
6 × 4 in (152 × 102 mm)3 mm3,053 mm2Any material, including 3 mm wood and acrylic
8 × 5.34 in (203 × 136 mm)4.1 mm4,070 mm2Any material, including 3 mm wood and acrylic
12 × 8 in (305 × 203 mm)6.1 mm6,105 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Autumn Leaves and Pumpkins Please SVG files

← Leaves and Pumpkins Please stencil plate All 13 Autumn Leaves and Pumpkins Please designs Leaves and Pumpkins Please with a pumpkin →