Leaves and Pumpkins Please in Kaushan Script SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Autumn Leaves and Pumpkins Please” set in Kaushan Script, a lively brush script, on 3 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.
What is in the file
| Size | 100 × 52 mm (3.94 × 2.06 in), scales to any size |
|---|---|
| Pieces | 28 separate pieces |
| Outlines to cut | 43: 28 outer edges and 15 cut-outs |
| Cut length | 1,261 mm at this size |
| Narrowest part | 0.9 mm at this size |
| Nodes | 832 curve and line segments |
Measured from the file. PNG: 2,000 × 1,085 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.52 in (25 × 13 mm) | 0.23 mm | 320 mm | 160 | Too fine for most machines |
| 2 × 1.05 in (51 × 27 mm) | 0.46 mm | 641 mm | 45 | Too fine for most machines |
| 3 × 1.57 in (76 × 40 mm) | 0.69 mm | 961 mm | 18 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.1 in (102 × 53 mm) | 0.91 mm | 1,281 mm | 10 | Fine detail: vinyl and paper only, weed with care |
| 6 × 3.14 in (152 × 80 mm) | 1.4 mm | 1,922 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.19 in (203 × 106 mm) | 1.8 mm | 2,562 mm | 2 | Vinyl, card and thin sheet |
| 12 × 6.29 in (305 × 160 mm) | 2.7 mm | 3,844 mm | 1 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Autumn Leaves and Pumpkins Please SVG files
-
Leaves and Pumpkins Please in Lilita One Solid · 30 pieces
-
Leaves and Pumpkins Please in Alfa Slab One Solid · 20 pieces
-
Leaves and Pumpkins Please in Amatic SC Solid · 29 pieces
-
Leaves and Pumpkins Please in block capitals Solid · 29 pieces
-
Leaves and Pumpkins Please in script and capitals Solid · 19 pieces
-
Leaves and Pumpkins Please with hearts Solid · 18 pieces
-
Leaves and Pumpkins Please outline lettering Outline · 30 pieces
-
Leaves and Pumpkins Please stencil plate Solid · one piece
← Leaves and Pumpkins Please in Lobster All 13 Autumn Leaves and Pumpkins Please designs Leaves and Pumpkins Please in Lilita One →