Free arrow SVG

Arrow bent into a circle frame SVG

Arrow bent into a circle frame. The preview is the SVG file itself.

A slim arrow bent into a ring so that its head almost meets its chevron tail, with three beads at the bottom. A frame for a monogram or a short name.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	92 × 100 mm (3.62 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	664 mm at this size
Narrowest part	3.3 mm at this size
Nodes	67 curve and line segments

Measured from the file. PNG: 1,844 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.92 × 1 in (23 × 25 mm)	0.84 mm	169 mm	100	Fine detail: vinyl and paper only, weed with care
1.84 × 2 in (47 × 51 mm)	1.7 mm	337 mm	25	Vinyl, card and thin sheet
2.76 × 3 in (70 × 76 mm)	2.5 mm	506 mm	12	Vinyl, card and thin sheet
3.68 × 4 in (93 × 102 mm)	3.4 mm	675 mm	6	Any material, including 3 mm wood and acrylic
5.51 × 6 in (140 × 152 mm)	5 mm	1,012 mm	2	Any material, including 3 mm wood and acrylic
7.35 × 8 in (187 × 203 mm)	6.7 mm	1,349 mm	1	Any material, including 3 mm wood and acrylic
11.03 × 12 in (280 × 305 mm)	10 mm	2,024 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More arrow SVG files

← Bow and arrow All 28 arrows Stone arrowhead →