Free arrow SVG

Chunky arrow with a notched tail SVG

Chunky arrow with a notched tail. The preview is the SVG file itself.

A wide arrow with softened corners and a V notch cut into its tail. There is room on the shaft for a word, which makes it a ready-made sign blank.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 61 mm (3.94 × 2.41 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	286 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	17 curve and line segments

Measured from the file. PNG: 2,000 × 1,256 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.61 in (25 × 16 mm)	Over 1.5 mm	73 mm	150	Vinyl, card and thin sheet
2 × 1.23 in (51 × 31 mm)	Over 3 mm	145 mm	40	Any material, including 3 mm wood and acrylic
3 × 1.84 in (76 × 47 mm)	Over 4.6 mm	218 mm	15	Any material, including 3 mm wood and acrylic
4 × 2.45 in (102 × 62 mm)	Over 6.1 mm	291 mm	8	Any material, including 3 mm wood and acrylic
6 × 3.68 in (152 × 93 mm)	Over 9.1 mm	436 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.9 in (203 × 125 mm)	Over 12 mm	581 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.36 in (305 × 187 mm)	Over 18 mm	872 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More arrow SVG files

← Double-sided arrow All 28 arrows Arrow outline →