Free arrow SVG

Double-sided arrow SVG

Double-sided arrow. The preview is the SVG file itself.

One shaft with a head at each end, for width marks, two-way signs and size labels. It reads the same either way round.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 40 mm (3.94 × 1.57 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	276 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	10 curve and line segments
Symmetry	2-fold rotation and mirror

Measured from the file. PNG: 2,000 × 846 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.4 in (25 × 10 mm)	Over 1.5 mm	70 mm	200	Vinyl, card and thin sheet
2 × 0.8 in (51 × 20 mm)	Over 3 mm	140 mm	60	Any material, including 3 mm wood and acrylic
3 × 1.2 in (76 × 30 mm)	Over 4.6 mm	210 mm	24	Any material, including 3 mm wood and acrylic
4 × 1.6 in (102 × 41 mm)	Over 6.1 mm	280 mm	12	Any material, including 3 mm wood and acrylic
6 × 2.4 in (152 × 61 mm)	Over 9.1 mm	421 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.2 in (203 × 81 mm)	Over 12 mm	561 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.8 in (305 × 122 mm)	Over 18 mm	841 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More arrow SVG files

← Simple thin arrow All 28 arrows Chunky arrow with a notched tail →