Free arrow SVG

Stone arrowhead SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Stone arrowhead, as a solid black shape
Stone arrowhead. The preview is the SVG file itself.

A knapped stone arrowhead with curved edges, side notches and a flared base, and slits for the ridge and the flake scars. Symmetrical, and solid enough for wood.

What is in the file

Size47 × 100 mm (1.86 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length514 mm at this size
Narrowest part3 mm at this size
Nodes54 curve and line segments
SymmetryMirror
Also found asArrow head SVG

Measured from the file. PNG: 985 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.47 × 1 in (12 × 25 mm)0.76 mm131 mm180Fine detail: vinyl and paper only, weed with care
0.94 × 2 in (24 × 51 mm)1.5 mm261 mm50Vinyl, card and thin sheet
1.42 × 3 in (36 × 76 mm)2.3 mm392 mm21Vinyl, card and thin sheet
1.89 × 4 in (48 × 102 mm)3 mm522 mm10Any material, including 3 mm wood and acrylic
2.83 × 6 in (72 × 152 mm)4.6 mm783 mm4Any material, including 3 mm wood and acrylic
3.78 × 8 in (96 × 203 mm)6.1 mm1,044 mm3Any material, including 3 mm wood and acrylic
5.66 × 12 in (144 × 305 mm)9.1 mm1,567 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More arrow SVG files

← Arrow bent into a circle frame All 28 arrows Block arrow pointing right →