Free zombie SVG

Zombie crossing sign SVG

Zombie crossing sign, as a solid black shape
Zombie crossing sign. The preview is the SVG file itself.

A diamond road sign on a short post with a shambling zombie cut out of it. Cut it from yellow vinyl or card and put black behind, and the zombie shows as a dark figure on the sign.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size83 × 100 mm (3.26 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length544 mm at this size
Narrowest part1.6 mm at this size
Nodes174 curve and line segments

Measured from the file. PNG: 1,669 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.83 × 1 in (21 × 25 mm)0.41 mm138 mm110Too fine for most machines
1.66 × 2 in (42 × 51 mm)0.81 mm276 mm30Fine detail: vinyl and paper only, weed with care
2.48 × 3 in (63 × 76 mm)1.2 mm415 mm12Vinyl, card and thin sheet
3.31 × 4 in (84 × 102 mm)1.6 mm553 mm6Vinyl, card and thin sheet
4.97 × 6 in (126 × 152 mm)2.4 mm829 mm2Vinyl, card and thin sheet
6.62 × 8 in (168 × 203 mm)3.3 mm1,105 mm1Any material, including 3 mm wood and acrylic
9.94 × 12 in (252 × 305 mm)4.9 mm1,658 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More zombie SVG files

← Peeking zombie All 13 zombies Zombie outline →